wtorek, 25 listopada 2014

3D printed box for RaspFPGA

This is my first printout using the fused deposition modelling technique. I've made an enclosure for the RaspFPGA board. Preparing CAD files I took the measurements of the second version of the RaspFPGA board but the first version of the RaspFPGA should also fit inside. It has been printed out on the Leapfrog creatr. For the final result look at the pictures below.

Pic. 1 - Enclosure.

Pic. 2 - RaspFPGA v2 board inside the box.

Brak komentarzy: